Dr. Pulley Variator - 241801 - 250cc CN250
Dr Pulley products are some of the best on the market today!
This racing variator from Dr Pulley is precision engineered to increase performance over stock variators.
The steep angled ramp plates in the Dr Pulley variators allow for faster and smoother engagement at all speeds, and allow lighter weighted sliders to fully extend to make the most of your CVT system. Longer channels create a more aggressive acceleration profile compared to stock variators.
The Dr Pulley variator comes with the variator, fan plate, spacer washers, and center dowel pin. Rollers or sliders weights not included.
Note: for most vehicles we do not recommend installing the spacer washers as it can result in a loss of top speed.
The Buggy Parts NW team highly recommends the Dr Pulley line and uses them in our own vehicles.
For Buggy owners, this product fits all buggies using a CN250 engine. All buggies with a high/low forward transmission such as the Hammerhead 250ss and Joyner Sand Viper 250 use the Dr Pulley variator product 231801.
This product is the same as these vehicle-specific part numbers:
Hammerhead Part #
Joyner Dirt Devil (2004 & 2006) part # SZ08100009, SZ08001009
Baja Reaction 250 (2-seater model) part # BR250-410
Baja Dune 250 Part # DN250-594
Kinroad 250cc models part # 2201A-SCC0-0000, 22031-SCC0-0000, 22041-SCC0-0000
Roketa GK-13 Part # GK-13-250-03-24-06
Roketa GK-19 Part # GK-19-250-03-64
SunL SLGK-250-2A Part # XF172MM-1070001, XF172MM-1070002, XF172MM-1071001, XF172MM-1071003, XF172MM-1070003
For Scooter owners, the CN250 version will work with the following brands (and more):
Honda: CN250, Foresight 250 '98, '99, Forza 250, Jazz 250
Peugeot: SV 250
Piaggio: X9 250, Hexagon LC 250
Suzuki: Burgman 250
Dimensions of this variator:
Variator Outer diameter: 128mm
Number of Fan plate teeth: 21
Uses six 23x18 or 24x18 slider or roller weights (Buggies use 23x18 weights)