250cc Clutch Main Spring - Red
Replacing the stock clutch Main Spring is an inexpensive upgrade that can increase the responsiveness of your go kart.
The main torque spring regulates when the variator "shifts" from a low gear ratio to the higher gear ratios. A stronger main torque spring keeps the buggy in a lower gear ratio until a higher RPM level, and "downshifts" faster when decelerating so you're in a lower ratio when you hit the gas again.
What this means is that you can reach your engine's highest torque range of RPMs at a lower velocity and stay there for a longer period of time.
Note: Using lighter weight rollers/Dr Pulley Sliders (13-17g) with this spring can affect your top speed due to the rollers not being heavy enough to fully overcome the spring's tension before hitting your stock CDI's RPM ceiling. This problem can be largely averted by using our aftermarket performance CDI.
When you need more low end power, this spring will help get you there!
For even more low end power, pair this spring with a new set of lightweight rollers or sliders for your variator!
This spring fits all 250cc buggies and scooters with CN250 and CF250 engines.
Spring OD: 65mm