Baja - Dune 250 - Gearbox
Find your part Reference Number in the diagram above, then click the link for the corresponding part below to see it on our site.
The parts numbers listed below are from the Baja Dune 250cc parts manual. While some effort has been made to clean up the images, some of them can still be difficult to read clearly. Sections are listed in the same order as in the parts manual.
If it's a part that we regularly stock, there will be a link you can click to view that product on our site. For all other parts that do not have links, we may or may not be able to get that item from a distributor if you contact us. Due to the old age and long discontinued status of this vehicle, many chassis-specific parts are likely no longer available.
Please click here, let us know the part name and number, and we'll get back to you with a price quote and availability.
Note: On mobile devices, some of the part numbers in the chart below may be interpreted as telephone numbers by your device. If you click a link and your device asks you if you want to dial a telephone number, we advise against doing so. This is a feature of your telephone or mobile device, not our website!
Item No. |
Part No. |
Description |
Qty. |
1 |
DN250-384 |
CASE, GEAR BOX (SINGLE SHAFT) |
1 |
2 |
DN250-385 |
COVER, GEAR BOX (SINGLE SHAFT) |
1 |
3 |
DN250-386 |
SEAL |
1 |
4 |
DN250-655 |
GEAR, OUTPUT (SINGLE SHAFT) |
1 |
5 |
DN250-388 |
DRIVE GEAR, PRIMARY (SINGLE SHAFT) |
1 |
6 |
DN250-389 |
GEAR, MIDDLE (SINGLE SHAFT, DOUBLE SHAFT) |
1 |
7 |
DN250-390 |
GEAR, INPUT (SINGLE SHAFT, DOUBLE SHAFT) |
2 |
8 |
DN250-391 |
SHAFT, MIDDLE (SINGLE SHAFT) |
1 |
9 |
DN250-392 |
SHAFT, INPUT (SINGLE SHAFT) |
1 |
10 |
DN250-393 |
SHAFT 1 |
1 |
11 |
DN250-394 |
SLEEVE, SPLINE |
1 |
12 |
DN250-395 |
FORK |
1 |
13 |
DN250-396 |
PIN |
1 |
14 |
DN250-397 |
SLEEVE, PIN |
1 |
15 |
DN250-398 |
SHAFT, FORK |
1 |
16 |
DN250-399 |
INTAKER, AIR |
1 |
17 |
DN250-400 |
PIPE, AIR |
1 |
18 |
DN250-401 |
CLIP, PIPE (1)8.5 |
1 |
19 |
2 |
||
20 |
3 |
||
21 |
DN250-404 |
BEARING 61909 |
2 |
22 |
DN250-405 |
BEARING, NEEDLE HK2210 |
3 |
23 |
1 |
||
24 |
DN250-407 |
SEAL, OIL 45x68x8 |
1 |
25 |
DN250-408 |
SEAL, OIL 14x22x5 |
1 |
26 |
DN250-409 |
O-RING 9.4x2.4 |
1 |
27 |
DN250-410 |
HOLE SPACER, ELASTIC GB/T893.1 68 |
1 |
28 |
DN250-411 |
HOLE SPACER, STEEL WIRE GB/T895.1 28 |
1 |
29 |
DN250-412 |
SHAFT SPACER, ELASTIC GB/T894.1 8 |
1 |
30 |
DN250-413 |
SHAFT SPACER, ELASTIC GB/T894.2 22 |
3 |
31 |
DN250-414 |
SHAFT SPACER, ELASTIC GB/T894.2 25 |
2 |
32 |
1 |
||
33 |
2 |
||
34 |
DN250-417 |
BOLT, FLANGE M6x32 |
7 |
35 |
2 |
||
36 |
DN250-419 |
BOLT, FLANGE M10x10 |
2 |
37 |
DN250-420 |
SCREW, ROUND HEAD GB/T70.1 M5x25 |
1 |
38 |
DN250-421 |
NUT, HEX GB/T41 M5 |
1 |
39 |
DN250-422 |
SPRING WASHER, STANDARD GB93 6 |
1 |
40 |
DN250-423 |
WASHER, COPPER 10.2x17x1.5 |
2 |
41 |
DN250-424 |
WASHER, FLAT 17x30x1 |
1 |
42 |
DN250-425 |
WASHER, FLAT 6.4x18x1 |
1 |
43 |
DN250-426 |
WASHER, FLAT 8.5x12x0.5 |
1 |
44 |
DN250-427 |
WASHER, FLAT 25.2x30x0.5 |
2 |
45 |
DN250-428 |
WASHER, COPPER 5.3x10x1 |
1 |
46 |
DN250-429 |
WASHER, FLAT 22.5x27.8x1 |
1 |
47 |
2 |