Home 
250cc parts Big Bore and Engine Endrigo Racing Cylinder Head for 250cc
250cc parts Big Bore and Engine Endrigo Racing Cylinder Head for 250cc
Your Cart is currently empty.
 View Full-Size Image |
Endrigo Racing Cylinder Head for 250cc |
|
|
Price:
$500.00
$274.95 You Save: $225.05 |
||
Best 250cc bang for your buck!Click to learn more!  Buggy Parts NW is now the exclusive distributor of the Endrigo Racing Head system! One of the most overlooked parts of the engine is the cylinder head. Most people are used to upgrading their air intake and exhaust for better air and fuel flow into and out of the system. Some people upgrade their carburetor and/or get a big bore kit to get more air and fuel to combust in their engine. But - most people don't consider what is happening to the air/fuel mixture as it enters and exits the engine! The stock cylinder head on your engine was cast from a mold and came with all the residual slag and flashing inside the intake and exhaust ports. The intake port is too small in diameter to match our 30mm intake manifold and creates a flow restriction when using a larger carburetor. The stock valves are installed without regard to optimal seating, and the exhaust port is left rough and unpolished from the casting process. ALL of these issues create flow restriction in your stock head that lead to an overall loss of power! The Endrigo Racing head series fixes these problems, giving you significantly more power over a stock cylinder head! Endrigo racing heads offer: Professional intake and exhaust porting Valve jobs Deck height milling Larger high performance valves (250cc "The Works" head only). Endrigo Racing Head options:Level 1 - 250cc "Deluxe" Head: $274.95- Ported intake and exhaust runners - Mulit-angle race valve job - Remachined head gasket surface. - 0.025” material shaved from the deck surface for an additional 1.0 point of compression. Level 2 - 250cc "The Works" head: $399.95 - Everything from the Stage 2, plus: - oversized intake valve - High-Performance valve springs so you can use an aftermarket high-lift camshaft! This kit is a direct bolt-on replacement for your current 250cc cylinder head. The prices above reflect sending your current cylinder head to us to be reworked. Turnaround/shipping time is generally 8 business days from receipt of your stock cylinder head.
|
||
| Ask a question about this product | ||
Recently Viewed Products
- Variator - 13g Roller weight for GY6 150cc (Category: Specials)
- Stock 72mm Cylinder Kit for CN/CFMoto 250 (Category: 250cc Original Parts)
- Throttle Cable - For Koso Slide Carbs (Category: Specials)
- 250cc Ultimate Engine package (Category: Big Bore and Engine)
- 75mm Gasket set for 75mm Big Bore Kit (Category: Big Bore and Engine)